Gemini Asteria Acid Catalyst, Clear, Gallon
Gemini Asteria Acid Catalyst CAT10-0700 is the activator for the Asteria Conversion Varnish system, including AFCVRS-02XX clears, ASTW-10XX whites, ACVP-8000 primer surfacer, and ASTS-0300 CV sealer. This 11.6 oz pre-measured bottle is sized to dose one short-filled gallon of Asteria, eliminating measurement errors at the point of use.
Mix at the ratio specified on the Asteria topcoat or sealer's Technical Data Sheet—typically 10–11% by volume depending on the product. DO NOT add more than the recommended catalyst amount; over-catalyzing will not speed cure or improve hardness, and may cause cracking, haziness, gloss issues, or finished-film failures. For professional use only with approved Gemini Asteria products. Always reference the current TDS before mixing.
Mix at the ratio specified on the Asteria topcoat or sealer's Technical Data Sheet—typically 10–11% by volume depending on the product. DO NOT add more than the recommended catalyst amount; over-catalyzing will not speed cure or improve hardness, and may cause cracking, haziness, gloss issues, or finished-film failures. For professional use only with approved Gemini Asteria products. Always reference the current TDS before mixing.
From $52.00
Gemini Asteria Acid Catalyst, Clear, Gallon—
$52.00
By: GeminiSKU: 1007001
Gemini Asteria Acid Catalyst CAT10-0700 is the activator for the Asteria Conversion Varnish system, including AFCVRS-02XX clears, ASTW-10XX whites, ACVP-8000 primer surfacer, and ASTS-0300 CV sealer. This 11.6 oz pre-measured bottle is sized to dose one short-filled gallon of Asteria, eliminating measurement errors at the point of use.
Mix at the ratio specified on the Asteria topcoat or sealer's Technical Data Sheet—typically 10–11% by volume depending on the product. DO NOT add more than the recommended catalyst amount; over-catalyzing will not speed cure or improve hardness, and may cause cracking, haziness, gloss issues, or finished-film failures. For professional use only with approved Gemini Asteria products. Always reference the current TDS before mixing.
Mix at the ratio specified on the Asteria topcoat or sealer's Technical Data Sheet—typically 10–11% by volume depending on the product. DO NOT add more than the recommended catalyst amount; over-catalyzing will not speed cure or improve hardness, and may cause cracking, haziness, gloss issues, or finished-film failures. For professional use only with approved Gemini Asteria products. Always reference the current TDS before mixing.
